Return Line Filters | Return Filtration

Return Line Filters, RAF Series

Flow rate: Max. 500 L/min

Clogging indicator set pressure: 0.15 MPa

Applications

The RAF series return filters can be installed on the top of a hydraulic tank. The return filters remove particle contaminants from fluid before it flows back to the tank. Filter element works under minimum hindrance with recommended flow rates.

Technical Specifications

Maximum operating pressure: 1.6 MPa
Operating temperature range: −25°C to +120°C
Clogging indicator set pressure: 0.15 MPa
Bypass valve cracking pressure: 0.175 MPa
Housing material: Cast aluminum
Compatible fluids: Mineral oils, emulsions, water-glycol fluids and phosphate ester hydraulic fluids

Inquiry

Pressure Drop Characteristic Curve

(Test liquid: kinematic viscosity—30mm2/s, density—0.86kg/dm3)

Dimensions

Model	M	D	D1	D2	D3	H	H1	H2	H3	d	L	L1	L2
RAF0063	G3/4,M27×2	φ60	φ75	φ28	φ59	178	243	24	16	φ11	86	50	70
RAF0120	G1,M33×2	φ86	φ104	φ36	φ85	175	265	30	22	φ11	113	70	83
RAF0160	G1-1/4,M42×2	φ86	φ106	φ40	φ85	255	365	34	25	φ9	116	68	77